0183 12-pins connector

0,00

The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.

0,00

With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.

0,00

This unit is the NMEA0183 AIS to NMEA2000 conversion option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA0183 AIS data to its equivalent in NMEA2000. This provides an 'out of the box' solution for quick installation with no configuration required. Please see the conversion list in the downloads section to see which AIS conversions the unit can perform.

0,00

N2KMeter, NMEA 2000®Diagnostic Tool The N2KMeter is a diagnostic tool for NMEA 2000® networks that allows users to validate NMEA 2000® network compatibility and operations during installation of a device or complete system, and diagnose possible network flaws or failures that occur on an operational network. Cut troubleshooting time from hours to seconds, by effectively identifying and diagnosing network problems. N2KMeter provides the detailed technical information an NMEA 2000® troubleshooting expert needs, yet it simplifies and summarizes, allowing an NMEA 2000® novice to effectively identify and diagnose network problems. Battery-powered operation allows a novice user to save readings for experts to analyze later, off the boat. N2KMeter uses a patented integrated intelligence technique to summarize multiple NMEA 2000® network operational variables into a single health index. To a service technician, it's a "guru-in-a-box, providing a detailed reading of network performance. It summarizes NMEA 2000® network health by displaying a happy face icon, indicating a healthy network; a sad face, indicating a serious problem; or a neutral face, indicating nominal performance (a good indication to repair things before they actually fail). N2KMeter then walks the user through each fault condition and its source, or it can record key operating parameters for offline review.

0,00

The Actisense QNB-1 en QNB-1-PMW bieden flexibele alternatieven voor meerdere aansluitingen. Met de mogelijkheid tot meerdere aansluitingen bespaart u kosten op andere NMEA 2000 kabel installaties. Beide QNB-1 versies zijn perfect geschikt voor plekken met een hoge instrumentie dichtheid. Als u van plan bent de QNB-1 aan te schaffen, bespaart u niet alleen kosten op kabelinstallaties. U bespaart met de QNB-1 ook op stroom. Zo kan de QNB-1 stroom beperken tot een veilig niveau voor geïnstalleerde netwerk. de LED's geven duidelijke informatie aan de installeur over bijvoorbeeld energie en de voeding. De QNB-1-PMW-versie is uitgerust met zes standaard NMEA 2000 M12 (Micro-fit) female connectors waarmee 'plug and play' aansluitingen voor snelle en eenvoudige installatie. Voordelen van de QNB-1 versies: Een eenheid bevat zes NMEA 2000 drops, Elektrische aansluitingen worden beschermd, Eenvoudige installatie op mini-en micro-netwerken

0,00

2 OPTO inputs, 12 ISO-Drive outputs with Ethernet, standard configuration, pluggable screwless terminals

0,00

2 OPTO inputs, 12 ISO-Drive outputs with Ethernet, standard configuration, pluggable screw terminals

0,00

-Monitors and reports the running status of max. 6 connected devices -Works with both AC and DC loads -Works with both automatically and manually switched loads -Can indicate the status of a wide variety of loads -Bilge Pumps -Winches -Running Lights -Transfer Pumps -Exhaust/Intake Fans -Monitors fuel and detects presence of water in fuel

0,00

Maretron’s Black Box (MBB200C) is a dedicated processing unit that includes Maretron’s N2KView® vessel monitoring and control software. Unlike a PC that allows any software to be loaded, the MBB200C runs only N2KView® software making it extremely stable and dedicated to monitoring and controlling your vessel. The MBB200C is ruggedized for marine use and includes a solid state disk drive to withstand the pounding associated with waves. And since the MBB200C dissipates less than 25 watts, there is no need for internal cooling fans that are noisy and wear out causing electronics to overheat and fail. The MBB200C connects to a monitor through a VGA connector and associated touch screen through a USB or serial port connection. Alternatives to controlling the N2KView® software through a touch screen include keyboards, mice, or track balls connected through USB. In addition to the two completely isolated CAN bus connectors (M12) for easy connection to single or redundant NMEA 2000® networks, the MBB200C has an Ethernet port for connecting Internet Protocol (IP) cameras for viewing within the N2KView® software. Of course you get the same flexibility using Maretron’s N2KView® software from the MBB200C as you would running the software on a PC, which includes the ability to configure as many screens as you want with exactly the information you want to see. Plus you get free upgrades to the software as improvements and new features are added.

0,00